FLASH SALE — 15% OFF SITEWIDE — ENDS MIDNIGHT — discount applied automatically at checkout
FREE shipping on orders over $99 · 30-day returns
About · Blog · Contact
AAArcForge Arms

CZ DUTY 4.0 C MS

SKUCZ-DUTY-40-C-MS CategoryBrands
$729.00 $619.65
✓ Free shipping over $99   ✓ Ships in 1–2 business days   ✓ 30-day returns

About this product

Range builders who finish their own frames still want one pistol that is done the day it arrives. CZ built the DUTY 4.0 for that job: a striker-fired 9x19mm with a serialized internal chassis, a fiberglass-reinforced polymer grip frame and a 4-inch barrel that is not threaded. Because the chassis carries the serial number, the grip frame is a modular part, which is a design idea anyone who works with polymer frames will recognize right away.

Pick the C compact for 15+1 rounds (17+1 with the extended base plate) at 770 g and 135 mm tall, or the F full-size for 17+1 (19+1 extended) at 780 g and 143 mm tall. Both share the 188 mm overall length, 33 mm width, fixed sights and a direct-mount optics-ready slide. MS versions add a manual thumb safety on top of the firing pin block, trigger safety and trigger bar safety. The refined SFDA trigger breaks at about 5.6 lbs with a 4 mm reset. MSRP is $729.

Capacity on the short-grip is 15+1, with a 17+1 option through the extended base plate. Height is 135 mm (5.3 in) and the empty weight 770 g (27.2 oz). If you carry, this is the DUTY to look at; if you mostly shoot at the range, see the F.

Three things define the DUTY 4.0. First, a registered modular chassis: the registered part is inside, the frame module around it is modular. Second, the trigger, a striker SFDA rated at 25 ± 4 N (5.6 ± 0.9 lbs), 4 mm (0.16 in) reset, 9 ± 1 mm (0.4 ± 0.04 in) travel, which is short and repeatable for a service pistol. Third, a direct-mount optics-ready slide, shown by CZ with Holosun, Aimpoint and Shield dots fitted, so a optic sits low without a stack of plates.

The MS model carries a frame-mounted manual thumb safety on top of the firing pin block, trigger safety and trigger-bar safety. Everything else, chassis, trigger, slide and optics cut, is the same as the version without the lever.

The CZ DUTY 4.0 C MS suits anyone who wants a modern optics-ready 9mm with CZ's grip and a trigger that is better than the class average: concealed carry where your state allows it, home defense, and range time that does not need a service-size grip.

Every DUTY 4.0 sold here is a serialized firearm, so it ships to the FFL dealer you pick at checkout rather than to your door. Your dealer runs the required paperwork and applies the rules of your state when you come in to collect it. If you are not sure which local dealer to use, choose one before you order so the transfer goes smoothly. Frames, lowers and parts from our bundles still ship direct.

Specs at a glance

CZ DUTY 4.0 C MS SPECS AT A GLANCE 9x19mm (9mm Luger) CALIBER 15+1 (17+1 with t… MAGAZINE CAPACITY 102 mm (4 in) BARREL LENGTH 188 mm (7.4 in) OVERALL LENGTH
Editorial diagram — measurements verified during testing.

Specifications

Caliber9x19mm (9mm Luger)
Magazine capacity15+1 (17+1 with the extended base plate)
Barrel length102 mm (4 in)
Overall length188 mm (7.4 in)
Width33 mm (1.3 in)
Height135 mm (5.3 in)
Weight (empty magazine)770 g (27.2 oz)
Framefiberglass-reinforced polymer
TriggerSFDA striker-fired
Trigger pull25 ± 4 N (5.6 ± 0.9 lbs)
Trigger reset4 mm (0.16 in)
Trigger travel9 ± 1 mm (0.4 ± 0.04 in)
SafetiesFiring pin block, trigger safety, trigger bar safety, manual thumb safety
SightsFixed
Threaded barrelNo
OpticsDirect-mount optics ready
ManufacturerCZ (Česká zbrojovka)
MSRP$729

Frequently asked questions

Does the DUTY 4.0 come ready for a red dot?
The slide is cut for direct mounting, and CZ's own photos show Holosun, Aimpoint and Shield red dots fitted. Fixed iron sights are installed from the factory.
Which part of the DUTY 4.0 carries the serial number?
The internal chassis is the serialized part. That is why the polymer grip frame is modular, and it is also why the pistol must transfer through an FFL dealer.
What does MS mean on the CZ DUTY 4.0 C MS?
Manual safety. It adds a thumb lever to the firing pin block, trigger safety and trigger bar safety that every DUTY has.
Does the manual safety change the trigger?
No. CZ rates the trigger the same on both versions: 5.6 pounds with a 4 mm reset.
Sources & methodology. Editorial review and rating by Ethan Caldwell based on hands-on testing notes and published vendor specifications. Pricing verified at time of publication.
$729.00 $619.65
Can't find what you're looking for? Search 50,000+ firearms, parts & accessories. We order it in and ship to your local FFL.